Asphalt Driveway Cost Calculator
Estimate the total cost of an asphalt driveway based on dimensions, depth, and material costs.
Published by:
isCalculator Editorial Team
Was this calculator helpful?
How to use this tool?
How to Use the Asphalt Driveway Cost Calculator
This calculator estimates the total cost of asphalt for a driveway based on its dimensions, material cost, and waste factor. All measurements must be in imperial units (feet and inches).
- Enter Driveway Dimensions: Input the Length (feet), Width (feet), and Depth (inches) of your driveway.
- Set Material Cost: Enter the Cost per ton of asphalt in dollars (e.g., 120).
- Adjust Waste Factor: The default Waste factor is 10% to account for compaction and waste. Change it if needed (0% or more).
- Calculate: Click the Calculate Cost button.
- Read Results: The total cost appears at the top. Below, you’ll see:
- Volume in cubic feet
- Weight in tons (before waste)
- Material Cost (without waste)
- Waste Added cost
Tip: All inputs must be positive numbers. If you see an error, check that fields are filled correctly.
Previous Results
| Result | Inputs | Date |
|---|
Frequently Asked Questions
Asphalt density is approximately 0.11 tons per cubic foot (145 lbs per cubic foot). The volume in cubic feet is multiplied by 0.11 to get tons.
A waste factor of 5-10% is common to account for compaction, spillage, and irregular shapes. Our calculator defaults to 10%.
Yes, but note that commercial costs may vary due to larger scale, equipment, and labor. This calculator provides a basic material cost estimate.