Bitumen Calculator
Calculate the required amount of bitumen for a given area based on thickness and density.
Published by:
isCalculator Editorial Team
Was this calculator helpful?
How to use this tool?
This calculator estimates the mass of bitumen required for a paving or coating project. It uses metric units (m², mm, kg/m³).
- Enter Area (m²): Input the surface area to be covered in square meters.
- Enter Thickness (mm): Input the desired thickness of the bitumen layer in millimeters.
- Enter Density (kg/m³): The default density is 2400 kg/m³ (typical for asphalt). Adjust if your material differs.
- Click "Calculate": The result shows the required bitumen mass in kilograms (kg).
How it works: The calculator converts thickness from mm to meters, computes volume (Area × Thickness in meters), then multiplies by density to get mass.
Tip: Ensure all inputs are positive numbers. Invalid entries will be highlighted in red.
Previous Results
| Result | Inputs | Date |
|---|
Frequently Asked Questions
The required bitumen mass is calculated by multiplying the area (m²) by the thickness (converted to meters) and then by the density (kg/m³).
Bitumen density typically ranges from 1000 to 2400 kg/m³ depending on the grade and temperature. The default value is 2400 kg/m³.
Yes, this calculator can be used for asphalt as well, but note that asphalt is a mixture of bitumen and aggregates, so the density may differ.